Brass Flare Fittings

Home Products Brass Flare Fittings
Have a Question?

Brass Flare Fittings


Flare fittings are a type of compression fitting used with metal tubing, usually soft steel, ductile (soft) copper and aluminum, though other materials are also used. Tube flaring is considered to be a type of forging operation, and is usually a cold working procedure. During assembly, a flare nut is used to secure the flared tubing’s tapered end to the also tapered fitting, producing a pressure-resistant, leak-tight seal. Flared connections offer a high degree of long-term reliability and for this reason are often used in mission-critical and inaccessible locations.
Flared fittings are appropriate alternatives to solder-type joints when the use of an open flame is either not desired or impractical. Copper tube used for propane, LP, or natural gas may use flared brass fittings of single 45°-flare type, according to NFPA 54/ANSI. Z223.1.
Flare fittings consist of a body with a flared or coned end. Special flaring tools are used to install the tube to fit inside the flared end, providing a deep seal. Flare fittings can handle higher pressures and a wider range of operating parameters than standard compression fittings.

Product Range :
  • Double End Flare Elbow
  • Reducing Flare Elbow
  • Brass Hald Flare Elbow
  • Brass Half Flare Tee
  • Brass Hex Flare Nuts
  • Brass Flare Elbow
  • Brass Flare Tee
  • Brass Flare Adapter
  • Brass Cylinder Adaptor
  • Flare Double End Flare Union
  • Reducing Flare Union
  • Brass Half Flare Union
  • Brass Flare Seal Plug
  • Brass Split Valve Flare Nuts
  • Brass Long Neck Flare Nuts
  • Brass Short Neck Flare Nut
  • Brass Dead Cap Nuts
  • Brass Reducing Flare Nuts
Material :
Brass Alloy: CuZn39Pb3 / CuZn39Pb2 / CuZn38Pb1.5 / CuZn37Pb2 / CuZn40Pb2 / MS 58 / BS2874 / IS 319 (Type I & II)
UNS (ASTM): C35300 / C35330 DZR / C36000 (CDA 360) / C36500 / C37000 / C37100 / C37700 / C37710 / C38500
BS: CZ121 / CZ122 / CZ124 / CZ128 / CZ 131 / CZ132
EN: CW602N / CW603N / CW606N / CW608N / CW612N / CW614N / CW617N
JIS: C3601 / C3602 / C3603 / C3604 / C3605 / C3712 / C3771
Any special brass material compositions as per customer’s requirement.
Size :
Sizes available from 1/4 3/8 1/2 5/8 3/4 5/16 7/8 and as per Custom Designs and requirements
Finsh & Coating :
Natural Clean / Nickel Plated / Electro-Tin Plated / Silver Plated / Copper Plated / Zinc Plated / Chrome Plated / Specified Surface Finish.
features :
1.These economical fittings resist mechanical pullout and disassembled repeatedly.
2.Long dry seal pipe thread (Important: strictly in ACCORDANCE with the Standards) minimize leakage and provide more clearance for tightening flare nuts.
3.Can be assembled and disassembled repeatedly.
4.Grooved shapes, elbows, tees etc…. Made form brass forgings to minimize strength and eliminate cracks
5.For flammable liquid, marine and refrigeration, air conditioner, copper pipe fittings, gas applications.
Threads :
ISO Metric (MM) / BA / BSW / BSP / BSPT / BSF / BSB / UNC / UNF / UNEF / NPT / NPS / Specified Threads Any threads as per client specification
Packaging :
Standard export package, by a wooden box, or as required.
Delivery Details :
Prompt or depend upon on the quantity of the order.
Delivery Time :
One week for manufacturing product.
Payment Terms :
L/C Letter of Credit, Bank transfer, T/T.
Request a Quote Arrow Tip

Have Any Questions? Contact Us Today!

Arrow Tip