We manufacture custom copper tube bends based on customer drawings and OEM requirements. Copper tubes are bent into required shapes such as 90-degree bends, U-bends, offset bends, and other custom configurations depending on application needs. Production focuses on custom bending work rather than standard off-the-shelf parts.
Copper tube bending is carried out using dedicated tooling with manual and hydraulic forming methods for repeat production. Each bend is developed according to tube size, wall thickness, and required geometry so the part fits correctly during assembly. Manufacturing is done in India, with supply arranged for UK industrial and engineering buyers.
Custom copper tube bends are used in HVAC systems, refrigeration systems, connector assemblies, and general industrial applications. Production is planned for repeat batches to maintain consistency across orders.
OEM copper tube bend manufactured according to technical drawings using 1/4 inch copper tube. The component includes controlled 90° and 135° bends with a welded brass flange connection. Designed for HVAC and refrigeration applications requiring accurate tube routing and secure flange mounting.
OEM copper tube L bend manufactured according to customer drawings using Cu 28 × 1 mm copper tube. Formed with a controlled 90-degree bend and assembled with a G 1-1/4 brass nut. Supplied for HVAC heat pump and chiller systems requiring copper tube bending for fluid circulation assemblies.
Copper tube bend manufactured from 1/4 inch copper tube and assembled with a refrigeration service valve. The tube is formed to a controlled bend radius and joined to the valve body for refrigeration and HVAC charging, servicing, and testing applications. Produced as an OEM copper tube bending component with brazed valve assembly.
OEM copper tube bend manufactured from a customer-supplied sample. Produced with controlled bending and a brass nut (3/8 thread) connection according to buyer requirements. Supplied for central heating radiator and boiler equipment manufacturers for custom assembly applications.
Copper tube bending is carried out based on customer drawings and OEM requirements. Work is focused only on copper tube bending for industrial and engineering applications. Forming is done using dedicated bending tooling with manual methods and hydraulic press support when required. This tooling-based approach helps maintain consistent bend shape for repeat production batches.
Typical tube sizes include 1/4", 3/8", 1/2", 5/8", and 3/4" outer diameter, with common wall thickness ranging from approximately 0.8 mm to 1.2 mm depending on application. Bending feasibility is reviewed based on tube diameter, wall thickness, and bend radius to avoid flattening or deformation during forming.
Manufacturing follows customer drawing specifications. Bending feasibility is checked before production based on tube size and project requirements.
Copper tube bends are manufactured in different shapes depending on assembly layout and installation requirements.
The following are common copper tube bend forms produced for industrial and OEM applications.
All copper tube bends are manufactured according to customer drawings and application requirements, with custom shapes produced as needed for specific assemblies.
Copper tube bends are used in a wide range of industrial and OEM systems where controlled routing and reliable tube positioning are required.
The following are common applications where custom copper tube bends are used.
Copper tube bends are manufactured using industrial copper grades selected according to customer drawings and application requirements. Common grades include C11000 (ETP copper) and DHP copper (CW024A / C12200). These grades are widely used for forming, electrical applications, and general industrial assemblies. Other copper grades can be supplied when specified by the customer.
Quality control is carried out during and after bending to confirm proper shape and consistency. Visual inspection checks surface condition, deformation, and any cracks after bending. Dimensional checks such as bend angle, overall length, and basic geometry are verified according to drawing requirements.
Material certificates can be provided from the raw material supplier when required.
To request a quotation for custom copper tube bending, send your drawing or sample.
Please include:
After receiving your RFQ, drawings are reviewed and technical clarification is discussed if required. A quotation is issued with production and supply details.
