We manufacture brass pipe fittings in India for Australian buyers based on thread specifications, fitting type, and supply requirement. Production covers standard threaded fittings and custom machined fittings used in plumbing, industrial piping, air lines, and fluid connection assemblies.
Common parts include nipples, reducers, elbows, tees, adaptors, sockets, and threaded connectors in brass grades specified according to customer requirement.
Our work supports bulk supply, repeat orders, and drawing-based brass fittings instead of retail pack supply. Each inquiry is reviewed before quotation to confirm thread standard, size range, material grade, and supply requirement.
We manufacture brass pipe fittings only against customer requirement. Standard fitting types can be produced, but stock is not held. Production follows customer drawing, thread requirement, and fitting specification.
Brass elbows are used where pipe direction changes at fixed angles. Brass tees are used where one flow line branches into two directions within the same threaded line.
Brass cross fittings connect four threaded ports from one body. Reducers are used where pipe size changes between inlet and outlet connection points.
Connectors join straight threaded sections between matching sizes. Adaptors are used where thread type, connection form, and fitting end changes between two parts.
Sockets connect two threaded pipe ends through an internal threaded body. Nipples are short external threaded connectors used between female-threaded fittings.
Brass flanged fittings are used where bolted connection or face mounting is required. Extension pieces are supplied where additional threaded length is needed in the connection line.
Unions allow pipe sections to be disconnected without rotating the full assembly. Couplers are used for direct joining of straight threaded pipe sections.
Brass pipe fittings are produced in specified brass grades according to drawing requirement, thread standard, and pressure use. Material and thread selection are confirmed before production.
We machine brass grades such as C360, C377, and CW614N for threaded pipe fittings and machined connection parts. Grade selection follows customer specification and machining requirement.
BSP and BSPT threads are commonly used for brass fittings supplied to Australian buyers. These threads are machined according to required pitch, thread depth, and sealing requirement.
NPT threads are produced when specified in the drawing and order requirement. Custom thread forms are also machined where fittings must match existing OEM connection systems.
Common fitting sizes start from 1/8 inch and extend up to 2 inch depending on fitting type and body design. Larger sizes are reviewed according to machining scope and part geometry.
We supply brass pipe fittings in bulk for repeat orders, OEM requirements, and distributor quantities. Production runs according to confirmed size, thread type, material grade, and fitting specification.
MOQ depends on fitting size, machining time, and order combination. Repeat batches follow the same dimensions and thread standard approved in earlier production.
Shipments are planned according to order volume, packing method, and agreed delivery terms.
To request a quotation, send fitting details with size, thread type, quantity, and brass grade requirement. Drawings or reference samples help when fittings are custom machined.
Please include:
After RFQ review, quotation is issued with price and indicative lead time based on confirmed fitting specification and supply scope.
